Smith's Enterprise

9269 Dunn Rd
Salemburg, NC
phone:(910)567-6542
fax:(910)567-2840

FRONT BLADE - for Sub Compact Tractors up to 50 hp Tractors.

The Front Blade is for Subcompact and Compact Tractors up to 50 hp and is used for pushing snow, sand, dirt, manure, gravel, etc.  We can build your front blade with most any type quick attach or pin on connection for no additional charge.  The FBH-60 Front Blade Hydraulic 60" wide weighs 335 pounds.

The Front Blade comes in 60", 72", 84", and 96" widths and angles up to 30 degrees to the right or left.  A manual front blade is available with 5 positions; straight, 15 degrees left or right and 30 degrees left or right. 

 

Key Benefits

bullet Replaceable Cutting Edge 1/2" thick by 6" wide and reversible.
bulletSkid shoes prevent gouging by maintaining the blade at a preset height.
bulletBlade height is approximately 22".
bulletSpring Trip Blade design so that blade pivots when it hits an obstruction.
bulletRadius dozer cutting edge available.
bulletPolyurethane cutting edge available for snow removal.
bulletHydraulic blade uses two double acting welded construction cylinders.
bulletEasily add cylinders and hoses to Manual blade to convert to Hydraulic blade

 

Available Sizes

Model Width at 30 Degrees Weight in Pounds
FBM 60 55" 320
FBM 72 62" 345
FBM 84 73" 380
FBM 96 83" 405
     
FBH 60 55" 335
FBH 72 62" 360
FBH 84 73" 395
FBH 96 83" 420

 

FRONT BLADE X - for 50 to 90 hp Tractors

 

The Front Blade X is for 50 to 90 Horsepower tractors and is used for pushing snow, sand, dirt, manure, gravel, etc.  We can build your front blade X with most any type quick attach or pin on connection for no additional charge. 

The Front Blade X comes in 84" and 96" widths and angles up to 30 degrees to the right or left.  A manual front blade X is available with 5 positions; straight, 15 degrees left or right and 30 degrees left or right. 

Available Sizes

Width in Inches Width when in 30degree position Weight in Pounds
FBXM 84 73" 720
FBXM 96 83" 746
     
FBXH 84 73" 745
FBXH 96 83" 771

 

Key Benefits

bulletReplaceable Cutting Edge 1/2" thick by 6" wide and reversible.
bulletSkid shoes prevent gouging by maintaining the blade at a preset height.
bulletBlade height is approximately 30".
bulletSpring Trip Blade design so that blade pivots when it hits an obstruction.
bulletTwo additional springs can be added easily
bulletRadius dozer cutting edge available.
bulletCross over relief valve and flexible blade guides standard.
bulletHydraulic blade uses two double acting welded construction cylinders.
bulletEasily add cylinders and hoses to Manual blade to convert to Hydraulic blade