Smith's Enterprise

9269 Dunn Rd
Salemburg, NC
phone:(910)567-6542
fax:(910)567-2840

 

HAY HANDLING EQUIPMENT - For Tractor Loaders or Skid Steers

Grapalator with Removable Legs - "HGARR-10"

 

 

The Grapalator is a front end loader or skid attachment that combines our hay accumulator and our hay grapple.

 

bulletAccumulate, Grapple, Transport, Load and unload Trailer and Barn with one attachment.
bulletDoes not limit the speed of the baler.
bulletHandles from 1 to 10 bales.
bulletWill work with bales from 34" to 42" long.  Will also work with shorter bales with minimum modifications.
bulletBolt on Mounting brackets.
bullet86-5/8" Wide by 95-1/4" Long not including mounting brackets.
bulletThe Grapalator weight is 780 Pounds.
bulletRails are removable and are stored on unit. 
bulletTakes less than 5 minutes to convert back and forth

 


 

HAY HANDLING EQUIPMENT - For Tractor Loaders or Skid Steers

Grapalator "HGA-10"

 

  

 

The Grapalator is a front end loader or skid attachment that combines our hay accumulator and our hay grapple.

 

bulletAccumulate, Grapple, Transport, and Load Trailer with one attachment.
bulletDoes not limit the speed of the baler.
bulletHandles from 1 to 10 bales.
bulletWill work with bales from 34" to 42" long.  Will also work with shorter bales with minimum modifications.
bulletBolt on Mounting brackets.
bullet86-5/8" Wide by 95-1/4" Long not including mounting brackets.
bulletThe Grapalator weight is 780 Pounds.

 


 

HAY HANDLING EQUIPMENT - For Tractor Loaders or Skid Steers

Hay Accumulator "HA-10"

 

 

The Accumulator is a front end loader or skid attachment that Accumulates Square Bale Hay.

 

bulletAccumulates from 1 to 10 Square Bales of Hay.
bulletNo Moving Parts
bulletDoes not limit the speed of the baler.
bulletDrive around busted bales of hay instead of having to stop baler to clear out other types of accumulators.
bulletWill work with bales from 32" to 42" long.
bulletBolt on Mounting Brackets.
bulletAdditional Mounting Brackets available.
bullet94-1/2" Wide by 93" Long not including mounting brackets.
bulletThe Accumulator weight is 520 Pounds.

 


 

HAY HANDLING EQUIPMENT - For Tractor Loaders or Skid Steers

Hay Grapple "HG-10"

 

 

The Grapple is a front end loader or skid attachment that Transports Square Bale Hay.

 

bulletGrapple and Transport from 1 to 10 Square Bales of Hay.
bulletWill work with bales from 32" to 42" long.
bulletBolt on Mounting Brackets.
bulletRemovable leg for ease of storage.
bulletAdditional Mounting Brackets available.
bullet71-1/2" Wide by 95-1/4" Long not including mounting brackets.
bulletThe Grapple weight is 585 Pounds.

 


 

HAY HANDLING EQUIPMENT -

For Farm and Light Industrial Loaders with caps u to 3,500 Lbs.

Bale Spear "BSFA"

 

     

 

The Bale Spear is a front end loader or skid attachment that Transports Round Bale Hay.

 

bulletSame Frame as the Fork Attachment
bullet3,500 pound capacity
bulletCan be easily convert to Fork Attachment and then back to Bale Spear.
bulletBales Spear is 49-1/4" Long
bulletBale Spear uses tapered sleeve with nut.
bulletTwo stabilizer spears at bottom attached with straight sleeve and locking bolt.
bulletThe Bale Spear weight is 240 Pounds.

 


 

ROUND BALE MOVER

 

The Round Bale Mover is designed to fit most tractor loaders and skid steers.   

 

Key Benefits

bulletEasily moves and repositions round bale hay wrapped with Net Wrap.
bulletArms do not hug bale, therefore bale can be tightly positioned next to another bale of hay. 
bulletAllows hay to be stacked as show in photo above allowing more hay storage per square foot.
bulletHeat treated bushings with stress proof pins.
bulletTwo welded construction double acting cylinders standard.
bulletOpens to 45" to allow for up to 5' diameter bales.
bulletCloses to 20" to allow use with 4' diameter bales and a little smaller.
bulletEasily replaceable fingers.

 

Available Sizes

Model Opening Range Weight in Pounds
RBM 20" to 45" 285

 

Options include Valve Kit, Hydraulic Quick Coupler Kit, and bulk head plate and fittings.